Search

Black 20mm Recycled Polyester Lanyards with Metal Trigger ClipThese black 20mm polyester lanyards provide a practical and professional way to display staff ID cards, visitor passes, access cards and event credentials.This version is supplied in black only. The plain, neutral design makes the lanyards suitable for workplaces, schools, healthcare settings, events and organisations looking for a simple option that works with most uniforms and brand styles.Each lanyard is made from recycled plastic bottles and measures approximately 90cm in total length, with a drop of around 45cm from the back of the neck. The smooth, lightweight polyester material and 20mm width make it comfortable for regular use.A safety breakaway at the back of the neck allows the lanyard to release if it is pulled or caught. The metal trigger clip provides a secure attachment point for compatible ID card holders, badge reels, event passes and punched cards.Key features:Black 20mm polyester lanyardMade from recycled plastic bottlesApproximately 90cm total lengthApproximately 45cm drop from the back of the neckSafety breakaway for quick releaseMetal trigger clip attachmentSuitable for ID card holders, badge reels and event passesPlain design suitable for workplaces, schools, healthcare and eventsProduct code: 06-1006-BKSupplied in packs of 25 lanyards..

Evolis RCT213NAAA Red Ribbon (1000 Print)The Evolis RCT213NAAA prints personalised text and line art in red. A coloured monochrome ribbon like this is a straightforward way to tell card types apart, such as visitor or contractor passes.Each ribbon gives up to 1000 prints and suits the Evolis Primacy 2 and Zenius 2. Ribbons for the Primacy 2 do not fit the original Evolis Primacy, so please check your model. Ribbons can be region specific, so if your printer was bought outside the EU contact us before ordering.Key featuresGenuine Evolis High Trust® ribbon, part RCT213NAAARed monochrome panelFor personalised text and line artUp to 1000 prints per ribbonCompatible printersEvolis Primacy 2Evolis Zenius 2..

Evolis Zenius 2 Overview The Evolis Zenius 2 is an intuitive, compact, single-sided ID card printer built for organisations that need to produce employee ID cards, visitor badges, membership cards and loyalty cards on demand. It fits on a desk, connects over USB or Ethernet and handles colour and monochrome printing without needing a dedicated print room or specialist operator. The Zenius 2 Classic connects over USB only. The Zenius 2 Expert adds Ethernet connectivity and supports optional encoding modules. Both carry a 3-year manufacturer warranty and are supplied with the ID-ALL Starter Edition card design software developed by CARDPRESSO. Specifications Specification Detail Print technologyDirect-to-card dye-sublimation / resin thermal transfer; rewrite capable Print capabilitySingle-sided, edge-to-edge Resolution300×300 dpi standard; 300×600 dpi (colour and monochrome); 300×1200 dpi (monochrome only) Colour print speedUp to 180 cards/hour Monochrome print speedUp to 700 cards/hour Input feeder capacity50 cards (0.76 mm / 30 mil) Output hopper capacity25 cards (front) or 50 cards (rear) Card formatISO CR80, 85.6 × 53.98 mm Card thickness0.25 to 0.76 mm (10 to 30 mil) Card typesPVC, composite PVC, PET (monochrome black only), paper, rewritable ConnectivityUSB 2.0 (Classic); USB 2.0 + Ethernet TCP-IP (Expert) OS compatibilityWindows, macOS Control panelLED panel with button Security featuresDigital data erasure; UV effect and double overlay (Expert, YMCKOO ribbon) Encoding optionsContactless chip, contact chip, magnetic stripe (Expert only) Software includedID-ALL Starter Edition (CARDPRESSO); Evolis Premium Suite 2 Noise level46 dB in operation Dimensions (H×W×D)196 × 205 × 310 mm Weight3.3 kg Warranty3 years (printer and print head) What's Included: Evolis Zenius 2 ID card printer Power supply and cable USB cable ID-ALL Starter Edition card design software licence (CARDPRESSO) Evolis Premium Suite 2 driver Print quality and speed for a working card programme The Zenius 2 uses direct-to-card dye-sublimation printing to produce full-colour PVC cards edge-to-edge. Logos, photos and barcodes reach right to the card border with no white margin. Standard resolution is 300 dpi, and you can raise this to 300×600 dpi for enhanced colour detail. Monochrome work can go further still, to 300×1200 dpi, which gives crisp text and sharp barcodes on black-only cards. Speed in practice At up to 180 colour cards per hour, the Zenius 2 suits on-demand and small-to-medium batch printing without creating a backlog. If your programme runs predominantly monochrome, such as security passes or visitor cards with black text only, the printer reaches 700 cards per hour. The 50-card input feeder means you can load a batch and walk away. A card-by-card insertion slot is also available when yo..

FOTODEK® Blank ICE White PVC Cards 760 Micron (Pack of 100) These are blank CR80 cards, the same as a standard credit card size (86mm x 54mm), and they're ready to run through any ID card printer straight out of the pack. They're made from 100% PVC in a crisp ice white finish and are built for printing employee ID cards, membership cards, access passes and event badges, anywhere you need a professional, durable card rather than a laminated or cardboard alternative that wears out or peels at the corners. Because these plastic cards are blank, you're free to print whatever your organisation needs onto them: a photo, a logo, a barcode, terms and conditions on the reverse, without being locked into a fixed template. At 760 microns, they're a solid card in the hand and hold up nicely to daily wear. Features and Benefits Ice white finish for crisp, clean prints 100% PVC construction for a longer lifespan than cardboard or laminated cards Standard CR80 size, 86mm x 54mm, the same as a credit card 760 micron (30mil) thickness Compatible with all major desktop ID card printers Consistent, defect-free surface for reliable print results Suitable for employee ID, access control and membership cards Sold in packs of 100 Manufacturer code: WF76-AI About FOTODEK If you haven't come across the name before, FOTODEK is one of the most established brands in blank PVC cards, widely recognised across the ID card industry as a market-leading manufacturer. Their cards are used for everything from staff ID and club membership schemes to event passes and PVC business cards, and they're a trusted choice specifically because of how consistent the surface quality is from card to card. There's no warping and no print defects, batch after batch. Choosing FOTODEK over an unbranded card means you know every card in the pack prints the same way as the last, so all of your ID cards come out consistently for your entire organisation. Don't Forget the Rest of Your ID Consumables Pair these high-quality blank ID cards with a lanyard and an ID card holder for a complete ID card setup for your organisation. And if you're printing these yourself, check out our range of ID card printer ribbons too, so you're not caught out mid-batch with the cards ready and no ribbon left to print them. Order everything together, and your ID card setup is sorted in one delivery rather than three separate ones...

HID 2000PGGMN iCLASS 2K/2 26-bit Printable PVC Smart CardsPack of 100 cardsPrintable PVC Cards, ContactlessNo slot or hole punch13.56MHz frequency2k bits (256 bytes) memoryiCLASS technologyCR80 sizeManufactured by HID5-7 working days lead timeBest used for access controlLifetime warrantyAbout iCLASS 2000PGGMN Printable Smart Card 2K/2/26-bitHID iCLASS PVC Smart Card 2K/2 bit memory size (104 bytes free in one area)Programmed to order within 5-7 days using your site detailsThin ISO Printable cardPlain on both sidesGraphics quality surface for use with direct image printersSame size and thickness as a standard credit cardThis is a custom product and turnaround is estimated at 5-7 working days; however, we can confirm an exact lead time on receipt of the enquiry.IMPORTANTAs this is a custom product we cannot accept returns unless they are faulty.Format, Facility Code and Number Range to be specified...

Cleaning Kit for the Magicard Pronto 100 Printer (E9100)The Magicard E9100 Pronto 100 Cleaning Kit contains the essential supplies needed to maintain a Magicard Pronto 100 ID card printer.Routine cleaning helps remove dust, card debris and residue from the printer’s internal card path and printhead. This supports reliable card feeding, helps maintain consistent image quality and can reduce premature wear to important printer components.The T-shaped cleaning cards are designed to clean the printer’s internal card path and transport rollers, while the cleaning pen allows more targeted maintenance of the printhead.This kit is designed specifically for the Magicard Pronto 100 ID card printer.Kit contents:10 x T-shaped cleaning cards1 x cleaning penKey features:Compatible with the Magicard Pronto 100Helps remove dust, dirt and card debrisSupports reliable printer performanceHelps maintain clear and consistent print qualityCan help extend the life of the printhead and transport rollersSuitable for routine preventative maintenanceMagicard manufacturer part number: E9100..

Magicard ME300YMCKO Full Colour Ribbon (300 Prints)The Magicard ME300YMCKO is a YMCKO colour ribbon designed for enviricard paperboard cards, printed on a Magicard 300. Paperboard can be recycled in full after use, so it works well for cards with a shorter life, such as visitor passes, membership cards and event tickets.A roll prints 300 cards on one side or 150 on both sides. Five panels build each card: yellow, magenta and cyan for photo quality colour, black resin for crisp text and barcodes, then a clear overlay. The /3 at the end of the part number shows it is chipped for the EMEA region (Europe, the Middle East, Asia and Australia).Key featuresFull colour YMCKO ribbon for enviricard paperboard cards300 single sided or 150 double sided prints per rollManufacturer part number ME300YMCKO/3, model number 48-3050Chipped for the EMEA regionCompatible printersMagicard 300..

Magicard Pronto100 ID Card Printer Overview The Magicard Pronto100 is a single-sided ID card printer built for organisations that need to produce professional ID cards and badges in-house, without a large machine or a complicated setup. It suits teams printing up to around 1,000 cards per year and arrives ready to use with EasyBadge Lite card design software included. Magicard designed the Pronto100 to be the fastest and highest-quality printer in its class. The footprint is smaller than an A4 sheet of paper, so it sits comfortably on a desk, yet produces excellent results. The printer is built and packaged from over 75% recycled or recyclable material, so it comes with an environmental conscience from day one. Specifications Specification Detail Print technologyColour dye sublimation; monochrome thermal; rewritable Print resolution300 dpi Print speed (colour)18 sec/card (standard); 23 sec/card (HD photo quality) Print speed (monochrome)4.7 sec/card ThroughputUp to 200 colour cards/hour; up to 766 monochrome cards/hour Card capacity50-card input hopper; 50-card output hopper; hand-feed Card sizesCR80 (85.6 × 54 mm); CR79 (83.9 × 51 mm) Card thickness0.51 mm to 1.02 mm (20 to 40 mil) ConnectivityUSB 2.0; Ethernet (100-Base TX / 10-Base-T) OS compatibilityWindows 7, 8, 10 and 11 (32/64-bit); Windows Server; Mac OS; Linux (CUPS) Security featuresHoloKote® watermark (3 standard designs); Digital Shredding Software includedEasyBadge Lite card design software Dimensions208 mm H × 179 mm W × 309 mm D Warranty3-year MagiCover Limited Warranty (covers printer and 50,000-card / 250,000-panel printhead); optional 1-year extension What's Included: Magicard Pronto100 single-sided ID card printer Printer power supply and cable USB cable 50-card input and output hoppers EasyBadge Lite card design software Driver installation Print quality and speed for a working card programme The Pronto100 is the fastest printer in Magicard's compact range. At standard colour mode, it prints an edge-to-edge colour card in 18 seconds. Switch to HD photo quality and that rises to 23 seconds per card, with photo-realistic colour reproduction that holds up well for portrait ID work. For text-only or barcode cards, the monochrome setting runs at 4.7 seconds per card. At that pace, a batch of visitor passes at a front desk is printed before a queue forms. Edge-to-edge colour printing uses Magicard's optimised colour profiles to carry the design to the very edge of the card. This means there is no white border around your design, so you can produce professional-looking cards quickly and easily. The dye film cassette printer ribbon drops straight in, with no film threading. So, replacing a ribbon is just as fast as printing cards. Rewritable card support is built in, so temporary cards, visitor passes and short-term credentials ca..

Paxton 692-448 Net2 ISO Proximity Cards with MagstripeThe Paxton 692-448 Net2 ISO proximity cards combine contactless access control technology with a HiCo magnetic stripe, making them suitable for organisations that use Paxton Net2 alongside other card-based systems.Each card contains a unique eight-digit proximity ID and can be enrolled within Paxton Net2 software. Access permissions can then be assigned individually, allowing administrators to control which doors, areas or facilities each cardholder can access.The integrated magnetic stripe can be encoded for use with compatible secondary systems, including time and attendance, cashless payment, membership or additional access control applications.This is the version without a signature panel.The cards have a blank white, printable surface and can be personalised with employee photographs, names, job titles, company logos and other identification details. Their standard CR80 size and 760-micron thickness make them suitable for use with compatible plastic card printers.Key features:Compatible with Paxton Net2 access control systemsBuilt-in proximity chip with a unique eight-digit IDHiCo magnetic stripe for compatible secondary systemsNo signature panelBlank white printable surfaceSuitable for photo ID and branded access cardsStandard CR80 card size of approximately 86 mm × 54 mm760-micron card thicknessSuitable for staff, contractor, visitor and membership applicationsSupplied in packs of 10 cardsThe Paxton 692-448 is suited to sites that require both Net2 proximity access and magnetic stripe functionality on a single credential...

Paxton 692-500 Net2 Proximity ISO Cards 125kHzThe Paxton 692-500 Net2 proximity ISO card provides a simple and reliable way to manage contactless access across sites using a compatible Paxton Net2 system.Operating at 125kHz, each card contains a unique eight-digit identification number that can be enrolled within Net2 software. Access permissions can then be assigned to individual cardholders, allowing administrators to control which doors and areas staff, contractors or visitors can access.The cards have a blank white PVC surface on both sides and can be personalised with photographs, names, job titles, company logos, text and other branding using a compatible plastic card printer.This version is proximity-only and does not include a magnetic stripe. For applications that require both proximity and magnetic stripe functionality, the Paxton 692-448 card may be more suitable.Key features:Compatible with Paxton Net2 access control systems125kHz proximity technologyUnique eight-digit card identification numberContactless operation with compatible Net2 readersProximity-only card with no magnetic stripeBlank white printable front and backDurable PVC constructionStandard CR80 card size of approximately 86 mm × 54 mm760-micron card thicknessSuitable for staff, visitor and contractor access cardsPaxton product reference: 692-500Supplied in packs of 10 cards..

id card printing page build..

Zebra ZC100 ID Card Printer Overview The Zebra ZC100 is a compact, single-sided direct-to-card printer built for organisations that need a reliable, easy-to-use ID card solution without complexity. It suits teams printing up to around 10,000 cards a year, covering staff badges, visitor passes, membership cards and event credentials. Specifications Specification Detail Print technologyDye-sublimation / resin thermal transfer, direct to card Resolution300 dpi (11.8 dots/mm) Print capabilitySingle-sided, edge-to-edge on CR-80 Colour print speed150 cards/hr (YMCKO) Monochrome print speed700 cards/hr Input hopper100 cards (30 mil auto-adjusting) Output hopper100 cards (30 mil) Manual card feedYes, with LED bezel guide Card sizesCR80, CR79 Card thickness10 to 40 mil Card materialsPVC and PVC composite Memory2 GB flash Connectivity (standard)USB 2.0 Connectivity (optional)10/100 Ethernet; 802.11ac Wi-Fi Encoding (optional)Magnetic stripe, ISO 7811, tracks 1, 2 & 3, hi/lo coercivity (field-upgradeable) SecurityKensington lock slot, printer host authentication, AES data encryption Dimensions258 mm H × 157 mm W × 383 mm D Weight3.9 kg OS compatibilityWindows 7, 8, 10 and 11; Server 2008 to 2016; Ubuntu 16.x (64-bit); macOS 10.13.x Warranty3-year on printer and printhead What's Included:Zebra ZC100 ID Card Printer Main Power CablePower SupplyUSB Cable Print Quality and Speed for a Working Card Programme At 300 dpi, the ZC100 produces photo-quality colour ID cards with accurate flesh tones, sharp text and scannable barcodes. Colour cards print at 150 per hour, so a busy reception desk or HR team can keep up with demand without waiting around. Monochrome output reaches 700 cards per hour. Full-colour printing uses a YMCKO ribbon for photo ID badges and branded cards. The five panels cover yellow, magenta, cyan, black and a protective overlay. Monochrome printing covers text-only passes, access cards and anything where colour isn't needed, at a much faster rate. The ZC100 prints edge to edge on standard CR-80 stock, so your design runs to the card border with no white margin. The 100-card input and output hoppers mean you can run a batch and step away. If you need to print a single card outside of a batch, the manual feed slot handles it directly. An LED bezel guides the card in, so the process is straightforward even for staff who aren't regular users. Connectivity, Encoding and Fit-Everywhere Design The ZC100 is slim enough to sit on a reception desk or in a shared office without dominating the workspace, and its clean lines make it presentable in customer-facing areas. USB 2.0 is standard, with Ethernet as an optional upgrade. It connects the printer to your network so you can manage card printing from a separate workstation. Wi-Fi is also available as an option. If a cable run isn..

Compatible PVC Proximity Cards Encoded to 34-bit N10002 FormatThese cards are encoded with your site code and sequential number range as specified and are compatible with OHP0N34 cards.Pack of 100 CardsProximity PVC cardsPrintable cardsN10002 format125kHz frequencyNo slot or hole punchCR80 card sizeBest used for access control and printable ID cards3-5 working day lead time on receipt of card detailsLifetime warrantyAbout OHP0N34 Compatible PVC Card 34 bit N10002 FormatProgrammed to your site specificationSequential matching internal/external (ink-jetted) card numberingPrintable proximity card suitable for access control applicationsCompatible with OHP0N34 cardsHigh-quality print surface suitable for images, photos and textReliable and durable - resistant to environmental factors, cracking and breakingEncoded to 34 bit N10002 FormatIMPORTANTThis is a custom product, and turnaround is estimated at 3-5 working days; however, we can confirm an exact lead time on receipt of the enquiry.As this is a custom product, we cannot cancel your order once placed or accept returns unless they are faulty.Please provide us with the reference number printed on an existing card or box to ensure that these cards are encoded correctly. This is usually 7-9 numbers long and is printed on the bottom right-hand side of the card if held horizontally.Format, Facility Code and Number Range to be specified...

Compatible 692-500 Proximity ISO Cards 125kHz - Paxton 692-500 AlternativeThese compatible 692-500 proximity ISO cards provide a cost-effective alternative for access control systems already using Paxton 692-500 credentials.Operating at 125kHz, each card is individually encoded with a unique eight-digit number, allowing it to be enrolled and assigned to a cardholder within a compatible access control system. Access permissions can then be managed for employees, contractors and visitors across authorised doors and areas.These are compatible cards and are not manufactured by Paxton. They are designed to work alongside existing 692-500 cards, but system compatibility should be confirmed before ordering.The blank white surface can be personalised with photographs, names, job titles, company logos, text and other identification details using a compatible desktop ID card printer. Both standard PVC and 85% recycled material options are available.This version is proximity-only and does not include a magnetic stripe.Key features:Compatible with systems using existing 692-500 proximity cards125kHz proximity technologyUnique eight-digit identification numberContactless access control credentialProximity-only card with no magnetic stripeBlank white printable surfaceSuitable for full-colour and monochrome personalisationCompatible with standard desktop ID card printersStandard CR80 size of approximately 86 mm × 54 mm760-micron card thicknessStandard PVC materialManufactured to ISO card standardsSupplied shrink-wrapped in packs of 10 cards..

Evohold Black Landscape Open-Faced ID Card HoldersThe Evohold Black Landscape Open-Faced ID Card Holder is a durable, single-sided holder designed to display landscape ID cards securely while giving them a professional, consistent appearance.This version is supplied in black only. The open-face design keeps photographs, names and other printed card details clearly visible, while the black surround provides a defined frame around the card.Each holder accommodates one standard CR80 card in landscape orientation. Its lightweight construction makes it suitable for everyday use with staff ID cards, visitor passes, access control cards, membership cards and event credentials.Made in Britain using recycled materials, the holder offers a practical option for organisations looking to reduce the environmental impact of their ID accessories. It is also recyclable at the end of its usable life, subject to local recycling facilities.Key features:Black plastic card holderHolds one landscape CR80-sized cardOpen-faced design for clear card visibilitySingle-sided card displayMade in BritainManufactured using recycled materialsRecyclable, subject to local facilitiesDurable and lightweightCompatible with lanyards, badge reels and suitable clipsSuitable for staff ID, visitor, access control and event cardsSupplied in packs of 100 holders..

Evolis ACL004 T Card Printer Cleaning Kit (Pack of 10 Cleaning Cards)The Evolis ACL004 T Card Cleaning Kit is designed to remove dust, dirt and other debris from the card transport path inside compatible Evolis and Edikio card printers.Regular cleaning helps maintain reliable printer performance, improve print quality and reduce the risk of debris damaging the printhead, transport rollers or magnetic encoder components. Each T-shaped cleaning card passes through the printer to clean areas that can become contaminated during normal card printing.The kit contains 10 T cleaning cards and is suitable for routine preventative maintenance. Using the cleaning cards at the recommended intervals can help extend the working life of your printer and produce clearer, more consistent printed cards.Compatible printers include:Evolis BadgyEvolis ZeniusEvolis PrimacyEdikio DuplexKey features:Includes 10 T-shaped printer cleaning cardsRemoves dust and debris from the internal card pathHelps maintain print quality and printer reliabilitySupports longer printhead and roller lifeHelps protect magnetic encoder componentsSuitable for routine printer maintenanceEvolis manufacturer part number: ACL004..

Evolis Primacy 2 ID Card Printer Overview The Evolis Primacy 2 card printer is a direct-to-card ID card printer built for organisations that print regularly and need consistent, professional results at volume. With printing speeds of up to 280 cards per hour single-sided and 170 cards per hour for double-sided cards, it suits medium and large volume printing programmes running tens of thousands of cards a year. It handles colour and monochrome printing, rewritable card printing and a wide range of encoding options, all from a compact desktop unit. Specifications Specification Detail Print technologyDirect-to-card dye-sublimation / resin thermal transfer / Rewrite Print resolution300 × 300 dpi (colour and monochrome); 300 × 600 dpi (colour and monochrome); 300 × 1200 dpi (monochrome only) Colour speed (single-sided)Up to 280 cards per hour (YMCKO) Colour speed (dual-sided)Up to 170 cards per hour (YMCKOK) Printing capabilityEdge-to-edge, single or dual-sided Input hopper100 cards (200-card feeder optional) Output hopper100 cards Reject hopper50 cards Card sizesCR80 / ISO 7810 ID-1 (85.6 × 54 mm) Card thickness0.76 mm (30 mil) standard Card typesPVC, composite PVC, PET, ABS, rewritable ConnectivityUSB, Ethernet standard; Wi-Fi optional OS compatibilityWindows, macOS, Linux User interfaceLED panel standard; LCD touch screen optional Memory32 MB RAM Security featuresDigital erasing, Kineclipse® (optional), UV effect (optional), double overlay (optional), mechanical lock (optional), lamination module (optional) Warranty3 years (printer and printhead) Dimensions205 mm (W) × 297 mm (D) × 195 mm (H) Weight4.1 kg Part numbersPM2-0001-E (single-sided); PM2-0025-E (dual-sided) What's Included: Evolis Primacy 2 printer unit USB cable Power cable and power supply Starter cleaning kit CardPresso XXS software licence Quick start guide Print quality and throughput for a working card programme The Primacy 2 uses direct-to-card dye-sublimation for colour cards. Monochrome printing uses resin thermal transfer. Both technologies produce edge-to-edge results, so logos and backgrounds reach the full card face without a white border. Colour printing At 280 cards per hour, the single-sided model can process roughly 2,200 cards in a standard working day. The printer's colour profile system adjusts output to keep photos, logos and custom graphics accurate and consistent across long print runs. High-resolution mode The 300 × 1200 dpi monochrome printing mode sharpens text and barcodes significantly. It's worth enabling for cards that carry small-font information or machine-read codes like QR codes. Dual-sided printing The double-sided (also called the duplex) model prints both faces of the card automatically at up to 170 cards per hour. If you need to print terms, barcodes or access info..

FOTODEK® Blank White PVC Cards 480 micronThese plain white CR80 cards are sturdy at 480 microns and suitable for printing your organisation’s unique designs. Whether for staff ID cards, membership cards, or event passes, these reliable cards ensure smooth operation and security for your premises. FOTODEK® cards are premium, resulting in a significant enhancement in image quality due to their smooth surface. This also allows for sharper lines and more vibrant colours.Features and Benefits:Present personal and business information such as logos, branding, name, job description and company ID photoCrafted from 100% PVC and built to withstand daily wear and tear for longevity Suitable for various needs such as employee ID, access control, membership cards and event passes..

FOTODEK® White PVC Adhesive Cards Paper Backing 320 MicronWith these FOTODEK® White PVC cards you can fully customise them to your specific needs. Add text, logos, branding, descriptions and more! Simply peel the paper backing off and temporarily attach the printed ID to the access control card. Once it is no longer needed remove it again so it can be reused. No need to worry about damage as these 100% PVC cards are made to endure wear and tear. Additionally, these high-quality cards can also be used as event passes and membership cards.Features and Benefits:Pack of 100 cards320 MicronCR80 (54mm x 86mm) Premium cards with strong adhesion and long life span100% PVC for direct card printing with any ID card printerEnhanced photo image qualityCompatible with many ID Card Printers..

Magicard CK1 Printer Cleaning Kit for Pronto, Alto, Tempo and Opera PrintersThe Magicard CK1 Cleaning Kit contains the essential supplies needed to maintain compatible Magicard ID card printers.Routine cleaning helps remove dust, card debris and residue from the printer’s internal card path and printhead. This supports reliable card feeding, helps maintain consistent print quality and can reduce premature wear to important printer components.The T-shaped cleaning cards are designed to clean the internal card path and transport rollers, while the cleaning pen allows more targeted maintenance of the printhead.Compatible printers include:Magicard ProntoMagicard AltoMagicard TempoMagicard OperaKit contents:5 x T-shaped cleaning cards1 x cleaning penKey features:Compatible with selected Magicard ID card printersHelps remove dust, dirt and card debrisSupports reliable printer performanceHelps maintain clear and consistent print qualityCan help extend the life of the printhead and transport rollersSuitable for routine preventative maintenanceMagicard manufacturer part number: CK1..

MIFARE® DESFire® EV3 8K NXP Blank White CardsThe MIFARE® DESFire® EV3 8K card is a secure contactless smart card designed for access control, transport, campus, payment and multi-application identification systems.Manufactured using genuine NXP MIFARE DESFire EV3 technology, each card operates at 13.56 MHz and provides 8KB of memory for storing credentials and application data. The higher memory capacity makes this card suitable for organisations that need to support multiple applications or store more data on a single credential.MIFARE DESFire EV3 technology supports fast data transmission, flexible memory organisation and advanced security features to help protect sensitive identity and transaction data. The cards are designed for use with compatible MIFARE DESFire systems, readers and infrastructure. Compatibility should be confirmed before ordering.The blank white PVC surface can be personalised with photographs, names, job titles, company logos, text, barcodes and other identification details using a compatible plastic card printer.Key features:Genuine NXP MIFARE DESFire EV3 technology8KB memory capacity13.56 MHz contactless operating frequencySuitable for multi-application credentialsFast and secure data transmissionFlexible memory organisationBlank white printable PVC surface760-micron card thicknessSuitable for access control, public transport, campus ID, closed-loop payments and e-government applicationsSupplied in packs of 100 cards..

Paxton 692-448 Net2 ISO Proximity Cards with Magstripe and Signature PanelThe Paxton 692-448 Net2 ISO proximity card with magnetic stripe and signature panel is designed for organisations that need contactless access control alongside an additional method of cardholder verification.Each card contains a unique eight-digit proximity ID that can be enrolled within Paxton Net2 software. Administrators can then assign individual access permissions, controlling which doors, areas or facilities each cardholder is authorised to enter.The integrated HiCo magnetic stripe can be encoded for use with compatible secondary systems such as time and attendance, cashless payment, membership management or additional access control applications.This version includes a writable signature panel, allowing the cardholder’s signature to be added for visual verification by reception, security or site staff.The blank white printable surface can be personalised with photographs, names, job titles, company logos and other identification details. The cards are manufactured to standard CR80 dimensions and are suitable for use with compatible plastic card printers.Key features:Compatible with Paxton Net2 access control systemsUnique eight-digit proximity IDHiCo magnetic stripeWritable signature panel for visual verificationBlank white printable surfaceStandard CR80 card size of approximately 86 mm × 54 mm760-micron card thicknessSuitable for staff, contractors, visitors and membersSupplied in packs of 10..

Red 20mm Recycled Polyester Lanyards with Metal Trigger ClipThese red 20mm polyester lanyards provide a practical and highly visible way to display staff ID cards, visitor passes, access cards and event credentials.This version is supplied in red only, with a closest Pantone match of 1797C. The bold colour suits organisations that want to match their branding or colour-code teams, departments, visitors or access levels.Each lanyard is made from recycled plastic bottles and measures approximately 90cm in total length, with a drop of around 45cm from the back of the neck. The smooth, lightweight polyester material and 20mm width make it comfortable for regular use.A safety breakaway at the back of the neck allows the lanyard to release if it is pulled or caught. The durable metal trigger clip provides a secure attachment point for compatible ID card holders, badge reels, event passes and punched cards.Key features:Red 20mm polyester lanyardClosest Pantone match: 1797CMade from recycled plastic bottlesApproximately 90cm total lengthApproximately 45cm drop from the back of the neckSafety breakaway for quick releaseMetal trigger clip attachmentSuitable for ID card holders, badge reels and event passesSuitable for colour-coding teams, visitors or access levelsProduct code: 06-1006-RDSupplied in packs of 25 lanyards..

Salto MIFARE 1K Cards (Pack of 100)Suitable for organisations looking to prevent unauthorised access and improve security, these Salto cards offer 1k byte of memory making them useful for security data. With a frequency of 13.56 MHz, they are compatible with most Salto card readers.These contactless cards can be used for Salto access control systems and as photo ID cards, making them suitable for small to large corporations in offices, education, healthcare industry and more. They are equipped with MIFARE technology which allows users to store data to grant permission to doors, buildings and more.The blank Salto design means these cards can be personalised specifically to your requirements. Simply insert the smart card into your compatible CR80 ID card printer and add text, branding and more, if required. The high-quality PVC materials ensure your cards can withstand daily wear and tear.Please note, these cards are compatible with the Salto E9 series systems, as well as MIFARE systems that are read only.Features and Benefits:Access Management & IdentificationCR80 Credit Card Size (86mm x 54mm)Easily Track Access Within BuildingsProtects Stored Data with EncryptionProduct Type: PVC Card, Plain WhiteRecommended with Retransfer PrintersCome with a 1K Byte of Memory CapacityCompatible with Salto & MIFARE Card Systems Data Retention: 10 YearsSold in Packs of 100..