Search

Evolis Badgy 200 ID Card Printer Overview The Evolis Badgy 200 is a compact, single-sided card printer aimed at organisations that need to produce photo ID badges in modest volumes. The kit comes ready to print from the start. It includes the printer, Evolis Badge Studio® design software, a YMCKO colour ribbon good for 100 prints, 100 blank PVC cards, a USB cable and a cleaning card. Specifications Specification Detail Print technologyDirect-to-card dye-sublimation / resin thermal transfer Print sidesSingle-sided, edge-to-edge Resolution260 x 300 dpi Colour speed95 cards/hour (38 s per card) Monochrome speed325 cards/hour (11 s per card) Card feeder capacity25 cards at 0.76 mm (30 mil) Card thickness0.50 mm to 0.76 mm (20 to 30 mil) Card formatISO CR-80 / ISO 7810 (53.98 x 85.60 mm) ConnectivityUSB 2.0 (USB 1.1 and 3.0 compatible), cable included OS compatibilityWindows, macOS, Linux Memory16 MB Ribbon typesYMCKO colour (100 prints/roll); black monochrome (500 prints/roll) Included softwareEvolis Badge Studio® Warranty2 years (printer and print head) Part numberB22U0000RS What's Included: Badgy 200 printer Evolis Badge Studio® software licence YMCKO colour ribbon (100 prints) 100 blank white PVC cards (0.76 mm / 30 mil) USB cable Power supply Cleaning card Setting up and designing badges The Badgy 200 installs like any office printer. Cards load into the front feeder and printed badges collect from the front output hopper, so the unit works well against a wall with no rear clearance needed. Evolis Badge Studio® is included with every printer. It gives you a library of ready-made card templates, and you can personalise any of them with names, photos, job titles, barcodes and logos. If your organisation holds staff data in a spreadsheet or database, the software can pull variable data and run a batch print in one command. You are not entering names manually one at a time. Ribbon installation is easy. The ribbon cassette clicks in and is recognised automatically, so there is no manual calibration each time you reload. Print quality and throughput At 260 x 300 dpi, the Badgy 200 produces sharp photos and clean text on standard CR-80 PVC cards. It prints across the full card face edge to edge, so there is no unprinted white border around the card design. Colour output runs at 95 cards per hour. For a small business, club or school issuing a batch of staff or member badges, that rate is more than adequate. Monochrome output runs at 325 cards per hour. If you regularly print name-only or barcode-only cards, switching to a monochrome ribbon keeps ribbon costs down. The Badgy 200 suits organisations printing up to a few hundred colour cards a year. If your volume grows significantly beyond that, the Primacy 2 is built for higher throughput. Warranty, ribbons and ongoing supplies The Ba..

Evolis N5F208E100 Easy4Pro YMCKO Ribbon (300 Print)The N5F208E100 is an Easy4Pro full colour YMCKO ribbon for the Evolis Primacy 2. It gives 300 prints per roll. Easy4Pro ribbons fit without a ribbon cassette, which reduces the amount of plastic used.Yellow, magenta and cyan panels print detailed, bright colour images including photos. The black resin panel handles fine personalisation such as barcodes. The overlay seals the card with a clear layer against fading and everyday wear. Please note this ribbon is for the Primacy 2 only and does not fit the original Evolis Primacy. Ribbons are made for specific regions, so this one may not work in a printer bought outside the EU.Key featuresFull colour YMCKO ribbon300 prints per rollManufacturer part number N5F208E100Easy4Pro format with no ribbon cassette neededOverlay panel protects the printed cardCompatible printersEvolis Primacy 2..

Evolis N5H204E100 Easy4Pro Half Panel YMCKO Ribbon (400 Print)The Evolis N5H204E100 is a half panel YMCKO ribbon from the Easy4Pro range. Colour is printed on half of the card, which is usually enough for a photo or logo, while the black panel covers the full side for text and barcodes. Printing colour only where you need it lowers the cost of each card.Easy4Pro ribbons do not use a cassette, which cuts down on plastic. Each ribbon gives up to 400 prints. Ribbons for the Primacy 2 do not fit the original Evolis Primacy, so please check your model before ordering.Key featuresGenuine Evolis High Trust® ribbon, part N5H204E100Panels: yellow, magenta, cyan, black and overlayHalf panel colour for lower running costsOverlay protects against fading and wearCassette free Easy4Pro formatUp to 400 prints per ribbonCompatible printersEvolis Primacy 2Evolis Zenius 2..

Evolis N6F203E100 Easy4Pro YMCKO-K Colour Ribbon (200 Print)The Evolis N6F203E100 is an Easy4Pro YMCKOK colour ribbon for the Evolis Primacy 2. Easy4Pro ribbons need no ribbon cassette, which cuts down on the plastic you use. The panels run yellow, magenta, cyan, black, overlay and black, so you can print full colour on the front and black on the back of the card.Double sided printing needs a double sided Evolis printer. The black resin panel prints clear text and barcodes. A clear overlay then protects the printed card. Each roll gives up to 200 prints. Ribbons for the Primacy 2 do not fit the original Primacy. Ribbons are region specific, so a printer bought outside the EU may not accept this one. Please check your printer model before you order.Key featuresEasy4Pro ribbon, no cassette neededYMCKOK: yellow, magenta, cyan, black, overlay and blackPrints both sides on double sided Evolis printersUp to 200 prints per rollManufacturer part number N6F203E100Compatible printersEvolis Primacy 2..

Evolis N7H206NAAA Easy4Pro Half Panel YMCKO-KO Colour Ribbon (250 Print)This Easy4Pro half panel ribbon prints colour on the front of the card and black on the back on a double sided Evolis Primacy 2. Each roll gives 250 prints.On the front, the yellow, magenta and cyan panels print in full colour. The black resin panel adds crisp text and barcodes and an overlay protects the finished face. A second black panel and overlay then personalise and protect the reverse. The overlays help guard the card against fading and day to day wear. Please note this ribbon is for the Primacy 2 only and does not fit the original Evolis Primacy. Ribbons are made for specific regions, so this one may not work in a printer bought outside the EU. If you would rather not print in-house, Castlemount can also produce the cards for you through its ID card printing service.Key featuresHalf panel YMCKOKO colour ribbon250 prints per rollManufacturer part number N7H206NAAADouble sided printing on compatible double sided Evolis printersOverlay panels on both sidesCompatible printersEvolis Primacy 2..

Evolis NCT223NAAA Easy4Pro Black Ribbon (2000 Print)The Evolis NCT223NAAA is a black monochrome ribbon from the Easy4Pro range. It prints names, ID numbers, barcodes and other fine detail in black and is a cost effective choice when your cards do not need colour.Easy4Pro ribbons do not need a cassette, which reduces plastic use. Each ribbon gives up to 2000 prints and suits the Evolis Primacy 2 and Zenius 2. Ribbons for the Primacy 2 do not fit the original Evolis Primacy, so please check your model. Ribbons can be region specific, so if your printer was bought outside the EU contact us before ordering.Key featuresGenuine Evolis High Trust® ribbon, part NCT223NAAABlack (K) monochrome panelCassette free Easy4Pro formatUp to 2000 prints per ribbonCompatible printersEvolis Primacy 2Evolis Zenius 2..

Evolis R2F210NAAA KO Black Ribbon with Overlay (600 Print)This Evolis KO ribbon combines a black resin panel with a clear overlay panel. It is made for the Evolis Primacy 2 and Zenius 2 and gives 600 prints per roll.The black panel is suited to fine personalisation such as names, ID numbers and barcodes, while the overlay seals each card with a clear protective layer against fading and everyday wear. On compatible double sided Evolis printers it can print both sides of the card. Please note it does not fit the original Evolis Primacy, only the Primacy 2. Ribbons are made for specific regions, so this one may not work in a printer bought outside the EU. If you would rather not print in-house, Castlemount can also produce the cards for you through its ID card printing service.Key featuresBlack resin and overlay (KO) ribbon600 prints per rollManufacturer part number R2F210NAAADouble sided printing on compatible double sided Evolis printersOverlay protects against fading and wearCompatible printersEvolis Primacy 2Evolis Zenius 2..

Evolis R5F202E100 YMCKO Colour Ribbon (200 Print)The Evolis R5F202E100 is a five panel YMCKO colour ribbon for the Evolis Primacy 2 and Zenius 2 card printers. The yellow, magenta and cyan panels combine to print photos and full colour designs. The black resin panel prints clear text and barcodes. The overlay panel seals the card under a clear protective layer to help prevent fading.Each roll gives up to 200 prints. Please note that ribbons for the Primacy 2 do not fit the original Evolis Primacy. Ribbons are region specific, so a printer bought outside the EU may not accept this one. Please check your printer model before you order.Key featuresYMCKO: yellow, magenta, cyan, black resin and overlayUp to 200 prints per rollOverlay helps protect against fading and wearNot compatible with the original Evolis PrimacyManufacturer part number R5F202E100Compatible printersEvolis Primacy 2Evolis Zenius 2..

Evolis R5F208E100 YMCKO Ribbon (300 Print)The Evolis R5F208E100 YMCKO ribbon prints full colour cards on the Evolis Primacy 2. Use it for staff and student cards, membership passes or access control cards that carry a photo or logo. The yellow, magenta and cyan panels produce the colour image. The black panel prints clear text and the overlay adds a layer that protects the card from day to day wear.Each ribbon gives 300 single sided full colour prints and comes in a cassette for quick loading. Please note it is compatible with the Evolis Primacy 2 only.Key featuresGenuine Evolis High Trust® ribbon, part R5F208E100Five panels: yellow, magenta, cyan, black and overlay300 single sided full colour printsCassette format for quick installationFor single or double sided printingCompatible printersEvolis Primacy 2..

Evolis R5H204E100 YMCKO Half Panel Colour Ribbon (400 Print)The R5H204E100 is a half panel YMCKO colour ribbon for the Evolis Primacy 2 and Zenius 2. It gives 400 prints per roll and is made for cards that only need colour on part of the card, such as a photo or a logo, with black personalisation across one full side.Because the colour panels cover half the card, you use less ribbon per print and your consumable costs come down. The yellow, magenta and cyan panels print the colour area. The black resin panel handles text and barcodes. The overlay seals the card against fading and wear. Please note this ribbon does not fit the original Evolis Primacy. Ribbons are made for specific regions, so this one may not work in a printer bought outside the EU.Key featuresHalf panel YMCKO colour ribbon400 prints per rollManufacturer part number R5H204E100Lower cost per card than a full panel ribbonOverlay panel protects the printed cardCompatible printersEvolis Primacy 2Evolis Zenius 2..

Evolis R6F203E100 YMCKO-K Colour Ribbon (200 Print)The Evolis R6F203E100 YMCKO-K ribbon is designed for double sided printing on the Evolis Primacy 2. The front of the card is printed in full colour with black text and a clear overlay. The extra black panel prints the reverse, which suits cards with a photo on the front and text, barcodes or terms on the back.Each ribbon gives up to 200 prints. Ribbons for the Primacy 2 do not fit the original Evolis Primacy, so please check your model. Ribbons can be region specific, so if your printer was bought outside the EU contact us before ordering.Key featuresGenuine Evolis High Trust® ribbon, part R6F203E100Panels: yellow, magenta, cyan, black, overlay and blackBlack resin panel for fine text and barcodesOverlay protects against fading and wearUp to 200 prints per ribbonCompatible printersEvolis Primacy 2..

Evolis R7H206NAAA YMCKO-KO Half Panel Colour Ribbon (250 Print)The Evolis R7H206NAAA is a half panel YMCKOKO colour ribbon for the Evolis Primacy 2. Its panels run yellow, magenta, cyan, black, overlay, black and overlay, so you can print in full colour on the front and add black text with a protective overlay on the back. Double sided printing needs a double sided Evolis printer.The black resin panels print clear text and barcodes, while the overlay panels seal each side of the card under a clear protective layer. Each roll gives up to 250 prints. Ribbons for the Primacy 2 do not fit the original Evolis Primacy. Ribbons are region specific, so a printer bought outside the EU may not accept this one. Please check your printer model before you order.Key featuresHalf panel YMCKOKO colour ribbonPrints both sides on double sided Evolis printersBlack resin panels for text and barcodesOverlay panels help prevent fading and wearUp to 250 prints per rollManufacturer part number R7H206NAAACompatible printersEvolis Primacy 2..

Evolis RCT023NAA Black Monochrome Ribbon (2000 Prints)The Evolis RCT023NAA is a black monochrome ribbon for printing ID cards in black only. Black is the usual choice for names, job titles, ID numbers and barcodes, where clear and sharp print matters more than colour.Each roll gives up to 2,000 card prints, so changeovers are kept to a minimum when you issue cards in larger numbers. Please check the part number against your printer before ordering.Key featuresBlack monochrome ribbonUp to 2,000 prints per rollManufacturer code RCT023NAASuited to text, numbers and barcodes..

Evolis RCT212NAAA Blue Ribbon (1000 Image)The Evolis RCT212NAAA is a blue monochrome ribbon for the Evolis Primacy 2 and Zenius 2 card printers. It prints personalised text and line art in blue, giving a change from standard black on staff passes, membership cards and visitor badges.Each roll gives up to 1,000 prints. Ribbons for the Primacy 2 do not fit the original Evolis Primacy. Ribbons are region specific, so a printer bought outside the EU may not accept this one. Please check your printer model before you order. If you would prefer us to print the cards, Castlemount also offers an ID card printing service.Key featuresColour: blueMonochrome ribbon for text and line artUp to 1,000 prints per rollManufacturer part number RCT212NAAACompatible printersEvolis Primacy 2Evolis Zenius 2..

Evolis RCT213NAAA Red Ribbon (1000 Print)The Evolis RCT213NAAA prints personalised text and line art in red. A coloured monochrome ribbon like this is a straightforward way to tell card types apart, such as visitor or contractor passes.Each ribbon gives up to 1000 prints and suits the Evolis Primacy 2 and Zenius 2. Ribbons for the Primacy 2 do not fit the original Evolis Primacy, so please check your model. Ribbons can be region specific, so if your printer was bought outside the EU contact us before ordering.Key featuresGenuine Evolis High Trust® ribbon, part RCT213NAAARed monochrome panelFor personalised text and line artUp to 1000 prints per ribbonCompatible printersEvolis Primacy 2Evolis Zenius 2..

Evolis RCT214NAAA Green Ribbon (1000 Print)The Evolis RCT214NAAA is a green monochrome ribbon for the Evolis Primacy 2 and Zenius 2. Each roll gives 1,000 prints in a single green colour.It is designed for printing personalised text and line art onto cards, so you can add names, roles or ID numbers in green to match a card design or to tell one group of cardholders from another. Please note it does not fit the original Evolis Primacy, only the Primacy 2. Ribbons are made for specific regions, so this one may not work in a printer bought outside the EU. If you would rather not print in-house, Castlemount can also produce the cards for you through its ID card printing service.Key featuresGreen monochrome ribbon1,000 prints per rollManufacturer part number RCT214NAAAPrints personalised text and line artCompatible printersEvolis Primacy 2Evolis Zenius 2..

Evolis RCT215NAAA White Ribbon (1000 Print)The Evolis RCT215NAAA is a white monochrome ribbon for the Evolis Primacy 2 and Zenius 2. Each roll gives 1,000 prints.White ribbon is the answer when your cards are dark or already printed with a coloured background and black text would not show. Use it to add names, text or barcodes in clean white over the existing design. Please note it does not fit the original Evolis Primacy, only the Primacy 2. Ribbons are made for specific regions, so this one may not work in a printer bought outside the EU. If you would rather not print in-house, Castlemount can also produce the cards for you through its ID card printing service.Key featuresWhite monochrome ribbon1,000 prints per rollManufacturer part number RCT215NAAASuited to text and barcodes on dark pre-printed cardsCompatible printersEvolis Primacy 2Evolis Zenius 2..

Evolis RCT216NAAA Metallic Gold Ribbon (1000 Print)The Evolis RCT216NAAA prints personalised text and line art in metallic gold. Gold gives membership, loyalty or VIP cards a premium look while keeping the simplicity of a single colour ribbon.Each ribbon gives up to 1000 prints and suits the Evolis Primacy 2 and Zenius 2. Ribbons for the Primacy 2 do not fit the original Evolis Primacy, so please check your model. Ribbons can be region specific, so if your printer was bought outside the EU contact us before ordering. If you would prefer us to produce the cards, Castlemount can also print them through its ID card printing service.Key featuresGenuine Evolis High Trust® ribbon, part RCT216NAAAMetallic gold monochrome panelFor personalised text and line artUp to 1000 prints per ribbonCompatible printersEvolis Primacy 2Evolis Zenius 2..

Evolis RCT217NAAA Metallic Silver Ribbon (1000 Image)The Evolis RCT217NAAA is a metallic silver monochrome ribbon for the Evolis Primacy 2 and Zenius 2 card printers. It prints personalised text and line art in silver, for example on membership or VIP cards.Each roll gives up to 1,000 prints. Ribbons for the Primacy 2 do not fit the original Evolis Primacy. Ribbons are region specific, so a printer bought outside the EU may not accept this one. Please check your printer model before you order.Key featuresColour: metallic silverMonochrome ribbon for text and line artUp to 1,000 prints per rollManufacturer part number RCT217NAAACompatible printersEvolis Primacy 2Evolis Zenius 2..

Evolis RCT219NAAA BlackFLEX Ribbon (1000 Prints)The Evolis RCT219NAAA is a BlackFLEX monochrome ribbon for the Evolis Primacy 2 and Zenius 2 card printers. It prints bold black text and barcodes. The printed result is resistant to scratches and heat, which helps cards that are handled every day stay readable.Each roll gives up to 1,000 prints. Ribbons for the Primacy 2 do not fit the original Evolis Primacy. Ribbons are region specific, so a printer bought outside the EU may not accept this one. Please check your printer model before you order.Key featuresBlackFLEX monochrome ribbonBold black text and barcodesScratch and heat resistantUp to 1,000 prints per rollManufacturer part number RCT219NAAACompatible printersEvolis Primacy 2Evolis Zenius 2..

Evolis RCT223NAAA Black Monochrome Ribbon (2000 Prints)The Evolis RCT223NAAA black monochrome ribbon prints names, ID numbers, barcodes and other fine detail in black. It suits cards that do not need colour, for example on pre-printed card stock where only the cardholder details change.Each ribbon gives up to 2000 prints and suits the Evolis Primacy 2 and Zenius 2. Ribbons for the Primacy 2 do not fit the original Evolis Primacy, so please check your model. Ribbons can be region specific, so if your printer was bought outside the EU contact us before ordering.Key featuresGenuine Evolis High Trust® ribbon, part RCT223NAAABlack (K) monochrome panelSuits fine text and barcodesUp to 2000 prints per ribbonCompatible printersEvolis Primacy 2Evolis Zenius 2..

Evolis Zenius 2 Overview The Evolis Zenius 2 is an intuitive, compact, single-sided ID card printer built for organisations that need to produce employee ID cards, visitor badges, membership cards and loyalty cards on demand. It fits on a desk, connects over USB or Ethernet and handles colour and monochrome printing without needing a dedicated print room or specialist operator. The Zenius 2 Classic connects over USB only. The Zenius 2 Expert adds Ethernet connectivity and supports optional encoding modules. Both carry a 3-year manufacturer warranty and are supplied with the ID-ALL Starter Edition card design software developed by CARDPRESSO. Specifications Specification Detail Print technologyDirect-to-card dye-sublimation / resin thermal transfer; rewrite capable Print capabilitySingle-sided, edge-to-edge Resolution300×300 dpi standard; 300×600 dpi (colour and monochrome); 300×1200 dpi (monochrome only) Colour print speedUp to 180 cards/hour Monochrome print speedUp to 700 cards/hour Input feeder capacity50 cards (0.76 mm / 30 mil) Output hopper capacity25 cards (front) or 50 cards (rear) Card formatISO CR80, 85.6 × 53.98 mm Card thickness0.25 to 0.76 mm (10 to 30 mil) Card typesPVC, composite PVC, PET (monochrome black only), paper, rewritable ConnectivityUSB 2.0 (Classic); USB 2.0 + Ethernet TCP-IP (Expert) OS compatibilityWindows, macOS Control panelLED panel with button Security featuresDigital data erasure; UV effect and double overlay (Expert, YMCKOO ribbon) Encoding optionsContactless chip, contact chip, magnetic stripe (Expert only) Software includedID-ALL Starter Edition (CARDPRESSO); Evolis Premium Suite 2 Noise level46 dB in operation Dimensions (H×W×D)196 × 205 × 310 mm Weight3.3 kg Warranty3 years (printer and print head) What's Included: Evolis Zenius 2 ID card printer Power supply and cable USB cable ID-ALL Starter Edition card design software licence (CARDPRESSO) Evolis Premium Suite 2 driver Print quality and speed for a working card programme The Zenius 2 uses direct-to-card dye-sublimation printing to produce full-colour PVC cards edge-to-edge. Logos, photos and barcodes reach right to the card border with no white margin. Standard resolution is 300 dpi, and you can raise this to 300×600 dpi for enhanced colour detail. Monochrome work can go further still, to 300×1200 dpi, which gives crisp text and sharp barcodes on black-only cards. Speed in practice At up to 180 colour cards per hour, the Zenius 2 suits on-demand and small-to-medium batch printing without creating a backlog. If your programme runs predominantly monochrome, such as security passes or visitor cards with black text only, the printer reaches 700 cards per hour. The 50-card input feeder means you can load a batch and walk away. A card-by-card insertion slot is also available when yo..

Magicard ME300YMCKO Full Colour Ribbon (300 Prints)The Magicard ME300YMCKO is a YMCKO colour ribbon designed for enviricard paperboard cards, printed on a Magicard 300. Paperboard can be recycled in full after use, so it works well for cards with a shorter life, such as visitor passes, membership cards and event tickets.A roll prints 300 cards on one side or 150 on both sides. Five panels build each card: yellow, magenta and cyan for photo quality colour, black resin for crisp text and barcodes, then a clear overlay. The /3 at the end of the part number shows it is chipped for the EMEA region (Europe, the Middle East, Asia and Australia).Key featuresFull colour YMCKO ribbon for enviricard paperboard cards300 single sided or 150 double sided prints per rollManufacturer part number ME300YMCKO/3, model number 48-3050Chipped for the EMEA regionCompatible printersMagicard 300..

Magicard Pronto100 ID Card Printer Overview The Magicard Pronto100 is a single-sided ID card printer built for organisations that need to produce professional ID cards and badges in-house, without a large machine or a complicated setup. It suits teams printing up to around 1,000 cards per year and arrives ready to use with EasyBadge Lite card design software included. Magicard designed the Pronto100 to be the fastest and highest-quality printer in its class. The footprint is smaller than an A4 sheet of paper, so it sits comfortably on a desk, yet produces excellent results. The printer is built and packaged from over 75% recycled or recyclable material, so it comes with an environmental conscience from day one. Specifications Specification Detail Print technologyColour dye sublimation; monochrome thermal; rewritable Print resolution300 dpi Print speed (colour)18 sec/card (standard); 23 sec/card (HD photo quality) Print speed (monochrome)4.7 sec/card ThroughputUp to 200 colour cards/hour; up to 766 monochrome cards/hour Card capacity50-card input hopper; 50-card output hopper; hand-feed Card sizesCR80 (85.6 × 54 mm); CR79 (83.9 × 51 mm) Card thickness0.51 mm to 1.02 mm (20 to 40 mil) ConnectivityUSB 2.0; Ethernet (100-Base TX / 10-Base-T) OS compatibilityWindows 7, 8, 10 and 11 (32/64-bit); Windows Server; Mac OS; Linux (CUPS) Security featuresHoloKote® watermark (3 standard designs); Digital Shredding Software includedEasyBadge Lite card design software Dimensions208 mm H × 179 mm W × 309 mm D Warranty3-year MagiCover Limited Warranty (covers printer and 50,000-card / 250,000-panel printhead); optional 1-year extension What's Included: Magicard Pronto100 single-sided ID card printer Printer power supply and cable USB cable 50-card input and output hoppers EasyBadge Lite card design software Driver installation Print quality and speed for a working card programme The Pronto100 is the fastest printer in Magicard's compact range. At standard colour mode, it prints an edge-to-edge colour card in 18 seconds. Switch to HD photo quality and that rises to 23 seconds per card, with photo-realistic colour reproduction that holds up well for portrait ID work. For text-only or barcode cards, the monochrome setting runs at 4.7 seconds per card. At that pace, a batch of visitor passes at a front desk is printed before a queue forms. Edge-to-edge colour printing uses Magicard's optimised colour profiles to carry the design to the very edge of the card. This means there is no white border around your design, so you can produce professional-looking cards quickly and easily. The dye film cassette printer ribbon drops straight in, with no film threading. So, replacing a ribbon is just as fast as printing cards. Rewritable card support is built in, so temporary cards, visitor passes and short-term credentials ca..