Search

Evolis N5F208E100 Easy4Pro YMCKO Ribbon (300 Print)The N5F208E100 is an Easy4Pro full colour YMCKO ribbon for the Evolis Primacy 2. It gives 300 prints per roll. Easy4Pro ribbons fit without a ribbon cassette, which reduces the amount of plastic used.Yellow, magenta and cyan panels print detailed, bright colour images including photos. The black resin panel handles fine personalisation such as barcodes. The overlay seals the card with a clear layer against fading and everyday wear. Please note this ribbon is for the Primacy 2 only and does not fit the original Evolis Primacy. Ribbons are made for specific regions, so this one may not work in a printer bought outside the EU.Key featuresFull colour YMCKO ribbon300 prints per rollManufacturer part number N5F208E100Easy4Pro format with no ribbon cassette neededOverlay panel protects the printed cardCompatible printersEvolis Primacy 2..

Evolis N5H204E100 Easy4Pro Half Panel YMCKO Ribbon (400 Print)The Evolis N5H204E100 is a half panel YMCKO ribbon from the Easy4Pro range. Colour is printed on half of the card, which is usually enough for a photo or logo, while the black panel covers the full side for text and barcodes. Printing colour only where you need it lowers the cost of each card.Easy4Pro ribbons do not use a cassette, which cuts down on plastic. Each ribbon gives up to 400 prints. Ribbons for the Primacy 2 do not fit the original Evolis Primacy, so please check your model before ordering.Key featuresGenuine Evolis High Trust® ribbon, part N5H204E100Panels: yellow, magenta, cyan, black and overlayHalf panel colour for lower running costsOverlay protects against fading and wearCassette free Easy4Pro formatUp to 400 prints per ribbonCompatible printersEvolis Primacy 2Evolis Zenius 2..

Evolis N6F203E100 Easy4Pro YMCKO-K Colour Ribbon (200 Print)The Evolis N6F203E100 is an Easy4Pro YMCKOK colour ribbon for the Evolis Primacy 2. Easy4Pro ribbons need no ribbon cassette, which cuts down on the plastic you use. The panels run yellow, magenta, cyan, black, overlay and black, so you can print full colour on the front and black on the back of the card.Double sided printing needs a double sided Evolis printer. The black resin panel prints clear text and barcodes. A clear overlay then protects the printed card. Each roll gives up to 200 prints. Ribbons for the Primacy 2 do not fit the original Primacy. Ribbons are region specific, so a printer bought outside the EU may not accept this one. Please check your printer model before you order.Key featuresEasy4Pro ribbon, no cassette neededYMCKOK: yellow, magenta, cyan, black, overlay and blackPrints both sides on double sided Evolis printersUp to 200 prints per rollManufacturer part number N6F203E100Compatible printersEvolis Primacy 2..

Evolis N7H206NAAA Easy4Pro Half Panel YMCKO-KO Colour Ribbon (250 Print)This Easy4Pro half panel ribbon prints colour on the front of the card and black on the back on a double sided Evolis Primacy 2. Each roll gives 250 prints.On the front, the yellow, magenta and cyan panels print in full colour. The black resin panel adds crisp text and barcodes and an overlay protects the finished face. A second black panel and overlay then personalise and protect the reverse. The overlays help guard the card against fading and day to day wear. Please note this ribbon is for the Primacy 2 only and does not fit the original Evolis Primacy. Ribbons are made for specific regions, so this one may not work in a printer bought outside the EU. If you would rather not print in-house, Castlemount can also produce the cards for you through its ID card printing service.Key featuresHalf panel YMCKOKO colour ribbon250 prints per rollManufacturer part number N7H206NAAADouble sided printing on compatible double sided Evolis printersOverlay panels on both sidesCompatible printersEvolis Primacy 2..

Evolis NCT223NAAA Easy4Pro Black Ribbon (2000 Print)The Evolis NCT223NAAA is a black monochrome ribbon from the Easy4Pro range. It prints names, ID numbers, barcodes and other fine detail in black and is a cost effective choice when your cards do not need colour.Easy4Pro ribbons do not need a cassette, which reduces plastic use. Each ribbon gives up to 2000 prints and suits the Evolis Primacy 2 and Zenius 2. Ribbons for the Primacy 2 do not fit the original Evolis Primacy, so please check your model. Ribbons can be region specific, so if your printer was bought outside the EU contact us before ordering.Key featuresGenuine Evolis High Trust® ribbon, part NCT223NAAABlack (K) monochrome panelCassette free Easy4Pro formatUp to 2000 prints per ribbonCompatible printersEvolis Primacy 2Evolis Zenius 2..

Cleaning Kit for the Magicard Pronto 100 Printer (E9100)The Magicard E9100 Pronto 100 Cleaning Kit contains the essential supplies needed to maintain a Magicard Pronto 100 ID card printer.Routine cleaning helps remove dust, card debris and residue from the printer’s internal card path and printhead. This supports reliable card feeding, helps maintain consistent image quality and can reduce premature wear to important printer components.The T-shaped cleaning cards are designed to clean the printer’s internal card path and transport rollers, while the cleaning pen allows more targeted maintenance of the printhead.This kit is designed specifically for the Magicard Pronto 100 ID card printer.Kit contents:10 x T-shaped cleaning cards1 x cleaning penKey features:Compatible with the Magicard Pronto 100Helps remove dust, dirt and card debrisSupports reliable printer performanceHelps maintain clear and consistent print qualityCan help extend the life of the printhead and transport rollersSuitable for routine preventative maintenanceMagicard manufacturer part number: E9100..

Magicard Pronto100 ID Card Printer Overview The Magicard Pronto100 is a single-sided ID card printer built for organisations that need to produce professional ID cards and badges in-house, without a large machine or a complicated setup. It suits teams printing up to around 1,000 cards per year and arrives ready to use with EasyBadge Lite card design software included. Magicard designed the Pronto100 to be the fastest and highest-quality printer in its class. The footprint is smaller than an A4 sheet of paper, so it sits comfortably on a desk, yet produces excellent results. The printer is built and packaged from over 75% recycled or recyclable material, so it comes with an environmental conscience from day one. Specifications Specification Detail Print technologyColour dye sublimation; monochrome thermal; rewritable Print resolution300 dpi Print speed (colour)18 sec/card (standard); 23 sec/card (HD photo quality) Print speed (monochrome)4.7 sec/card ThroughputUp to 200 colour cards/hour; up to 766 monochrome cards/hour Card capacity50-card input hopper; 50-card output hopper; hand-feed Card sizesCR80 (85.6 × 54 mm); CR79 (83.9 × 51 mm) Card thickness0.51 mm to 1.02 mm (20 to 40 mil) ConnectivityUSB 2.0; Ethernet (100-Base TX / 10-Base-T) OS compatibilityWindows 7, 8, 10 and 11 (32/64-bit); Windows Server; Mac OS; Linux (CUPS) Security featuresHoloKote® watermark (3 standard designs); Digital Shredding Software includedEasyBadge Lite card design software Dimensions208 mm H × 179 mm W × 309 mm D Warranty3-year MagiCover Limited Warranty (covers printer and 50,000-card / 250,000-panel printhead); optional 1-year extension What's Included: Magicard Pronto100 single-sided ID card printer Printer power supply and cable USB cable 50-card input and output hoppers EasyBadge Lite card design software Driver installation Print quality and speed for a working card programme The Pronto100 is the fastest printer in Magicard's compact range. At standard colour mode, it prints an edge-to-edge colour card in 18 seconds. Switch to HD photo quality and that rises to 23 seconds per card, with photo-realistic colour reproduction that holds up well for portrait ID work. For text-only or barcode cards, the monochrome setting runs at 4.7 seconds per card. At that pace, a batch of visitor passes at a front desk is printed before a queue forms. Edge-to-edge colour printing uses Magicard's optimised colour profiles to carry the design to the very edge of the card. This means there is no white border around your design, so you can produce professional-looking cards quickly and easily. The dye film cassette printer ribbon drops straight in, with no film threading. So, replacing a ribbon is just as fast as printing cards. Rewritable card support is built in, so temporary cards, visitor passes and short-term credentials ca..

Paxton 692-500 Net2 Proximity ISO Cards 125kHzThe Paxton 692-500 Net2 proximity ISO card provides a simple and reliable way to manage contactless access across sites using a compatible Paxton Net2 system.Operating at 125kHz, each card contains a unique eight-digit identification number that can be enrolled within Net2 software. Access permissions can then be assigned to individual cardholders, allowing administrators to control which doors and areas staff, contractors or visitors can access.The cards have a blank white PVC surface on both sides and can be personalised with photographs, names, job titles, company logos, text and other branding using a compatible plastic card printer.This version is proximity-only and does not include a magnetic stripe. For applications that require both proximity and magnetic stripe functionality, the Paxton 692-448 card may be more suitable.Key features:Compatible with Paxton Net2 access control systems125kHz proximity technologyUnique eight-digit card identification numberContactless operation with compatible Net2 readersProximity-only card with no magnetic stripeBlank white printable front and backDurable PVC constructionStandard CR80 card size of approximately 86 mm × 54 mm760-micron card thicknessSuitable for staff, visitor and contractor access cardsPaxton product reference: 692-500Supplied in packs of 10 cards..

Compatible PVC Proximity Cards Encoded to 34-bit N10002 FormatThese cards are encoded with your site code and sequential number range as specified and are compatible with OHP0N34 cards.Pack of 100 CardsProximity PVC cardsPrintable cardsN10002 format125kHz frequencyNo slot or hole punchCR80 card sizeBest used for access control and printable ID cards3-5 working day lead time on receipt of card detailsLifetime warrantyAbout OHP0N34 Compatible PVC Card 34 bit N10002 FormatProgrammed to your site specificationSequential matching internal/external (ink-jetted) card numberingPrintable proximity card suitable for access control applicationsCompatible with OHP0N34 cardsHigh-quality print surface suitable for images, photos and textReliable and durable - resistant to environmental factors, cracking and breakingEncoded to 34 bit N10002 FormatIMPORTANTThis is a custom product, and turnaround is estimated at 3-5 working days; however, we can confirm an exact lead time on receipt of the enquiry.As this is a custom product, we cannot cancel your order once placed or accept returns unless they are faulty.Please provide us with the reference number printed on an existing card or box to ensure that these cards are encoded correctly. This is usually 7-9 numbers long and is printed on the bottom right-hand side of the card if held horizontally.Format, Facility Code and Number Range to be specified...

Compatible 692-500 Proximity ISO Cards 125kHz - Paxton 692-500 AlternativeThese compatible 692-500 proximity ISO cards provide a cost-effective alternative for access control systems already using Paxton 692-500 credentials.Operating at 125kHz, each card is individually encoded with a unique eight-digit number, allowing it to be enrolled and assigned to a cardholder within a compatible access control system. Access permissions can then be managed for employees, contractors and visitors across authorised doors and areas.These are compatible cards and are not manufactured by Paxton. They are designed to work alongside existing 692-500 cards, but system compatibility should be confirmed before ordering.The blank white surface can be personalised with photographs, names, job titles, company logos, text and other identification details using a compatible desktop ID card printer. Both standard PVC and 85% recycled material options are available.This version is proximity-only and does not include a magnetic stripe.Key features:Compatible with systems using existing 692-500 proximity cards125kHz proximity technologyUnique eight-digit identification numberContactless access control credentialProximity-only card with no magnetic stripeBlank white printable surfaceSuitable for full-colour and monochrome personalisationCompatible with standard desktop ID card printersStandard CR80 size of approximately 86 mm × 54 mm760-micron card thicknessStandard PVC materialManufactured to ISO card standardsSupplied shrink-wrapped in packs of 10 cards..

Magicard CK1 Printer Cleaning Kit for Pronto, Alto, Tempo and Opera PrintersThe Magicard CK1 Cleaning Kit contains the essential supplies needed to maintain compatible Magicard ID card printers.Routine cleaning helps remove dust, card debris and residue from the printer’s internal card path and printhead. This supports reliable card feeding, helps maintain consistent print quality and can reduce premature wear to important printer components.The T-shaped cleaning cards are designed to clean the internal card path and transport rollers, while the cleaning pen allows more targeted maintenance of the printhead.Compatible printers include:Magicard ProntoMagicard AltoMagicard TempoMagicard OperaKit contents:5 x T-shaped cleaning cards1 x cleaning penKey features:Compatible with selected Magicard ID card printersHelps remove dust, dirt and card debrisSupports reliable printer performanceHelps maintain clear and consistent print qualityCan help extend the life of the printhead and transport rollersSuitable for routine preventative maintenanceMagicard manufacturer part number: CK1..

Magicard 3633-0053 Printer Cleaning Kit for Enduro+, Enduro3E, Rio Pro, Rio Pro 360, 300, 600 & E+The Magicard 3633-0053 Cleaning Kit contains the essential supplies needed to maintain compatible Magicard ID card printers.Routine cleaning helps remove dust, card debris and residue from the printer’s internal card path, transport rollers and printhead. This supports reliable card feeding, maintains consistent print quality and can help reduce premature wear to critical printer components.The T-shaped cleaning cards are designed to clean the internal card path and transport rollers, while the cleaning pen provides targeted cleaning of the printhead.Compatible printers include:Magicard Enduro+Magicard Enduro3EMagicard Rio ProMagicard Rio Pro 360Magicard 300Magicard 600Magicard E+Kit contents:10 x T-shaped cleaning cards1 x cleaning penKey features:Designed for compatible Magicard ID card printersHelps remove dust, dirt and card debrisSupports reliable card feeding and printer performanceHelps maintain clear and consistent print qualityCan help extend the life of the printhead and transport rollersSuitable for routine preventative maintenanceMagicard manufacturer part number: 3633-0053..

Grey 15mm Pre-Printed STAFF LanyardsThese grey 15mm pre-printed STAFF lanyards provide a subtle and professional way to identify employees across offices, schools, healthcare settings, events and public-facing environments.Each lanyard is printed with STAFF in white text, creating a clear contrast against the grey background without using a brighter colour. This makes the lanyards well suited to organisations that want staff identification to remain visible while complementing a wide range of uniforms and brand colours.The flat polyester material and 15mm width provide a comfortable fit for regular workplace use. A durable metal lobster clip allows compatible ID card holders, access cards and other lightweight items to be attached securely.A health and safety breakaway is fitted at the back of the neck and is designed to release if the lanyard becomes caught or pulled. The fitting can then be reconnected for continued use.Supplied ready to issue in packs of 100, these lanyards offer a practical alternative to bespoke printing for organisations that need consistent staff identification.Key features:Grey 15mm flat polyester lanyardPre-printed with STAFF in white textNeutral colour suitable for professional environmentsClear visual identification for employeesDurable metal lobster clip attachmentHealth and safety breakawayBreakaway can be reconnected after releaseComfortable for regular workplace useSuitable for ID cards, access cards and badge holdersSuitable for offices, schools, healthcare settings and eventsSupplied in packs of 100 lanyards..

HID ISOProx® II Printable Proximity Card1386LGGMNPlain white with a gloss finishPack of 100 cardsProximity CardStandard PVCSequential matching internal/external card numberingISOProx II Proximity TechnologyISO Prox format125 kHz frequencyNo slot punchManufactured by HIDCR80 size5-7 working daysBest used for encoded ID cards and access controlLifetime warrantyThe ISOProx II Card allows for printing and personalisation on a proximity technology card, suitable for all access control applications. The cards are manufactured to ISO 7810 and their high-quality print surface allows for printing of photos, images and text, including visual security features such as holograms, UV fluorescent inks and overlays and microprinting. IMPORTANTThis is a custom product and turnaround is estimated at 5-7 working days; however, we can confirm an exact lead time on receipt of the enquiry.As this is a custom product we cannot accept returns unless they are faulty.To ensure that these cards are encoded correctly please provide us with the reference number printed on an existing card or box. This is usually 7-9 numbers long and is printed on the bottom right-hand side of the card if held horizontally.If you are unsure of your card type or would like to place a larger order, please contact us.Please note we cannot accept responsibility for incorrect information so if you’re unsure we do offer a free card testing service...

Magicard 3633-0054 Printer Cleaning Rollers and SleevesThe Magicard 3633-0054 Cleaning Roller Kit is designed to remove dust, dirt and card debris before cards pass through a compatible Magicard ID card printer.The adhesive cleaning sleeves collect contaminants from the surface of each card as it enters the printer. This helps prevent debris from reaching the printhead and internal card path, supporting reliable card feeding and clearer, more consistent print quality.The kit includes five replacement cleaning sleeves and one reusable roller bar. Regular replacement of the cleaning sleeve can help protect important printer components and reduce the risk of marks, lines or imperfections appearing on printed cards.Compatible printers include:Magicard ProntoMagicard Enduro+Magicard Enduro3EMagicard Rio ProMagicard Rio Pro 360Magicard 300Magicard 600Kit contents:5 x adhesive cleaning sleeves1 x cleaning roller barKey features:Removes dust and debris from cards before printingHelps protect the printhead and internal card pathSupports reliable card feedingHelps maintain clear and consistent print qualityIncludes a reusable roller barSuitable for routine preventative maintenanceMagicard manufacturer part number: 3633-0054Supplied with five cleaning sleeves and one roller bar..

HID 1326 ProxCard II 26-Bit Clamshell Cards: Open Format N10002HID1326Pack of 100 cardsMinimum order of 100 cards requiredSlot punched proximity cards125kHzManufactured by HIDHoneywell 26 bit compatibleCR80 size, 85.7 mm x 54 mm x 0.76 mmLead Time: 5-7 Working DaysBest for ID cards and access controlLifetime warrantyThe HID 1326 ProxCard II is a durable 26-bit open-format proximity card designed for reliable access control. It features a white matt front, sequential internal and external numbering and a vertical slot punch for easy attachment to a lanyard or badge holder. Its slim clamshell design is suitable for carrying in a wallet or purse but is not suitable for direct card printing. Minimum order quantity: 100 cards.IMPORTANTThis is a custom product and turnaround is estimated at 5-7 working days; however, we can confirm an exact lead time on receipt of the enquiry.As this is a custom product we cannot accept returns unless they are faulty.To ensure that these cards are encoded correctly please provide us with the reference number printed on an existing card or box. This is usually 7-9 numbers long and is printed on the bottom right-hand side of the card if held horizontally.If you are unsure of your card type or would like to place a larger order, please contact us.Please note we cannot accept responsibility for incorrect information so if you’re unsure we do offer a free card testing service...

Black 10mm RPET Lanyards with Metal Lobster ClipThese black 10mm RPET lanyards provide a durable and professional way to carry staff ID cards, access passes and event credentials.Supplied in black only, they suit organisations looking for a neutral lanyard that works across a wide range of uniforms, workplaces and identification schemes. The understated finish makes them suitable for everyday staff use, visitor management and contractor identification.Each lanyard is made from woven recycled PET plastic, helping reduce the use of virgin materials while providing a strong and practical option for regular use. The slim 10mm width keeps the lanyard lightweight, while the metal lobster clip provides a secure attachment point for compatible ID card holders, badge holders and punched cards.A health and safety breakaway at the back of the neck is designed to release if the lanyard becomes caught or pulled. It can then be clipped back together for continued use, making these lanyards suitable for offices, schools, warehouses and manufacturing environments.Key features:Black 10mm RPET lanyardMade from woven recycled PET plasticDurable metal lobster clipHealth and safety breakawayBreakaway can be reconnected after releaseSlim and lightweight constructionSuitable for ID cards, badge holders and access passesProfessional black finishSuitable for offices, schools, warehouses and industrial settingsProduct code: 06-1010-BKSupplied in packs of 100 lanyards..

Grey 10mm RPET Lanyards with Metal Lobster ClipThese grey 10mm RPET lanyards offer a subtle and practical way to carry employee ID cards, access passes and visitor credentials.Supplied in grey only, the neutral finish pairs easily with most uniforms, workwear and brand colours. It is a strong option for organisations that want a professional lanyard without using a brighter colour for staff or visitor identification.Each lanyard is made from woven recycled PET plastic, helping reduce reliance on virgin material while providing the durability needed for regular use. The narrow 10mm width keeps the lanyard lightweight and unobtrusive, while the metal lobster clip securely attaches to compatible ID card holders, badge holders and punched cards.A health and safety breakaway at the back of the neck is designed to separate if the lanyard becomes caught or pulled. The breakaway can be reconnected afterwards, making these lanyards suitable for offices, schools, warehouses, events and manufacturing environments.Key features:Grey 10mm RPET lanyardMade from woven recycled PET plasticNeutral finish suitable for professional environmentsDurable metal lobster clipHealth and safety breakawayBreakaway can be reconnected after releaseSlim and lightweight constructionSuitable for ID cards, badge holders and access passesComplements a wide range of uniforms and brandingSuitable for workplaces, schools, events and industrial settingsSupplied in packs of 100 lanyards..

Black 10mm Tubular Polyester Lanyards with Plastic ClipThese black 10mm tubular polyester lanyards provide a simple, professional option for carrying staff ID cards, access passes and visitor credentials.Supplied in black only, they are suitable for workplaces, schools, events and organisations that want a neutral lanyard that works with most uniforms and brand colours. The matching black plastic clip creates a consistent, understated finish.The tubular polyester construction gives each lanyard a smooth, rounded profile, while the slim 10mm width keeps it lightweight and comfortable for everyday wear. The plastic clip provides a practical attachment point for compatible ID card holders, badge holders and event passes.A health and safety breakaway at the back of the neck is designed to release if the lanyard becomes caught or pulled, helping make it suitable for regular use in busy working environments.Key features:Black 10mm tubular polyester lanyardMatching black plastic clipSmooth, rounded tubular constructionSlim and lightweight designHealth and safety breakawaySuitable for ID card holders, badges and event passesNeutral colour for professional environmentsSuitable for offices, schools, healthcare settings and eventsProduct code: 06-1000-BKSupplied in packs of 25 lanyards..

Magicard MA1000K White Ribbon (1000 Print)The MA1000K-White is a single colour white ribbon for Magicard ID card printers. It adds white to a card design, which gives a clear contrast against the other colours on the card and helps text and logos stand out.Each roll gives up to 1,000 prints and is easy to fit. Please check the part number against your printer before ordering. Ribbons are made for specific regions, so this one may not work in a printer bought outside the EU. If you would rather not print in-house, Castlemount can also produce the cards for you through its ID card printing service.Key featuresWhite monochrome ribbonUp to 1,000 prints per rollManufacturer code MA1000K-White, model number 702-1003Easy to installCompatible printersMagicard 300Magicard 600Magicard E+Magicard Pronto..