Search

Evolis Badgy 200 ID Card Printer Overview The Evolis Badgy 200 is a compact, single-sided card printer aimed at organisations that need to produce photo ID badges in modest volumes. The kit comes ready to print from the start. It includes the printer, Evolis Badge Studio® design software, a YMCKO colour ribbon good for 100 prints, 100 blank PVC cards, a USB cable and a cleaning card. Specifications Specification Detail Print technologyDirect-to-card dye-sublimation / resin thermal transfer Print sidesSingle-sided, edge-to-edge Resolution260 x 300 dpi Colour speed95 cards/hour (38 s per card) Monochrome speed325 cards/hour (11 s per card) Card feeder capacity25 cards at 0.76 mm (30 mil) Card thickness0.50 mm to 0.76 mm (20 to 30 mil) Card formatISO CR-80 / ISO 7810 (53.98 x 85.60 mm) ConnectivityUSB 2.0 (USB 1.1 and 3.0 compatible), cable included OS compatibilityWindows, macOS, Linux Memory16 MB Ribbon typesYMCKO colour (100 prints/roll); black monochrome (500 prints/roll) Included softwareEvolis Badge Studio® Warranty2 years (printer and print head) Part numberB22U0000RS What's Included: Badgy 200 printer Evolis Badge Studio® software licence YMCKO colour ribbon (100 prints) 100 blank white PVC cards (0.76 mm / 30 mil) USB cable Power supply Cleaning card Setting up and designing badges The Badgy 200 installs like any office printer. Cards load into the front feeder and printed badges collect from the front output hopper, so the unit works well against a wall with no rear clearance needed. Evolis Badge Studio® is included with every printer. It gives you a library of ready-made card templates, and you can personalise any of them with names, photos, job titles, barcodes and logos. If your organisation holds staff data in a spreadsheet or database, the software can pull variable data and run a batch print in one command. You are not entering names manually one at a time. Ribbon installation is easy. The ribbon cassette clicks in and is recognised automatically, so there is no manual calibration each time you reload. Print quality and throughput At 260 x 300 dpi, the Badgy 200 produces sharp photos and clean text on standard CR-80 PVC cards. It prints across the full card face edge to edge, so there is no unprinted white border around the card design. Colour output runs at 95 cards per hour. For a small business, club or school issuing a batch of staff or member badges, that rate is more than adequate. Monochrome output runs at 325 cards per hour. If you regularly print name-only or barcode-only cards, switching to a monochrome ribbon keeps ribbon costs down. The Badgy 200 suits organisations printing up to a few hundred colour cards a year. If your volume grows significantly beyond that, the Primacy 2 is built for higher throughput. Warranty, ribbons and ongoing supplies The Ba..

Evolis Badgy CBGP0001C YMCKO Ribbon and Cards (100 Print)This Evolis Badgy kit combines a full colour YMCKO ribbon with cards. The ribbon gives up to 100 prints. YMCKO stands for yellow, magenta, cyan, black and overlay. The three colour panels build photos and logos and the black panel prints sharp text and barcodes. The clear overlay is laid over the finished card.Please check the part number against your printer before ordering.Key featuresFull colour YMCKO ribbonSupplied with cardsUp to 100 printsManufacturer code CBGP0001C..

Evolis Badgy CBGR0100C YMCKO Ribbon (100 Prints)The CBGR0100C is a full colour YMCKO ribbon for the Evolis Badgy card printer. It prints up to 100 cards per roll, which suits smaller runs of staff ID, membership or visitor cards.The yellow, magenta and cyan panels use dye sublimation to build bright colour images and photos. The black panel adds sharp text and the clear overlay panel puts a protective layer over the finished card to help it resist fading and smudging. The ribbon simply drops into the printer and is ready to use. Please check the part number against your printer before ordering.Key featuresFull colour YMCKO ribbonUp to 100 prints per rollManufacturer part number CBGR0100CDye sublimation colour printingClear overlay panel protects the printed cardCompatible printersEvolis Badgy 200..

Evolis Badgy CBGR0500K Black Monochrome Ribbon (500 Print)The Evolis Badgy CBGR0500K is a black monochrome ribbon for printing cards in black only. It suits staff badges, visitor passes and membership cards where the design is mainly names, ID numbers or barcodes and full colour is not needed.Each roll gives up to 500 card prints. Please check the part number against your printer before ordering. If you would rather not print in-house, Castlemount can also produce the cards for you through its ID card printing service.Key featuresBlack monochrome ribbonUp to 500 prints per rollManufacturer code CBGR0500KSuited to text, numbers and barcodes..