Search

Evolis N6F203E100 Easy4Pro YMCKO-K Colour Ribbon (200 Print)The Evolis N6F203E100 is an Easy4Pro YMCKOK colour ribbon for the Evolis Primacy 2. Easy4Pro ribbons need no ribbon cassette, which cuts down on the plastic you use. The panels run yellow, magenta, cyan, black, overlay and black, so you can print full colour on the front and black on the back of the card.Double sided printing needs a double sided Evolis printer. The black resin panel prints clear text and barcodes. A clear overlay then protects the printed card. Each roll gives up to 200 prints. Ribbons for the Primacy 2 do not fit the original Primacy. Ribbons are region specific, so a printer bought outside the EU may not accept this one. Please check your printer model before you order.Key featuresEasy4Pro ribbon, no cassette neededYMCKOK: yellow, magenta, cyan, black, overlay and blackPrints both sides on double sided Evolis printersUp to 200 prints per rollManufacturer part number N6F203E100Compatible printersEvolis Primacy 2..

Evolis R2F210NAAA KO Black Ribbon with Overlay (600 Print)This Evolis KO ribbon combines a black resin panel with a clear overlay panel. It is made for the Evolis Primacy 2 and Zenius 2 and gives 600 prints per roll.The black panel is suited to fine personalisation such as names, ID numbers and barcodes, while the overlay seals each card with a clear protective layer against fading and everyday wear. On compatible double sided Evolis printers it can print both sides of the card. Please note it does not fit the original Evolis Primacy, only the Primacy 2. Ribbons are made for specific regions, so this one may not work in a printer bought outside the EU. If you would rather not print in-house, Castlemount can also produce the cards for you through its ID card printing service.Key featuresBlack resin and overlay (KO) ribbon600 prints per rollManufacturer part number R2F210NAAADouble sided printing on compatible double sided Evolis printersOverlay protects against fading and wearCompatible printersEvolis Primacy 2Evolis Zenius 2..

Magicard MB200YMCKO Colour Ribbon (200 Print)The MB200YMCKO is a five panel colour ribbon made by Magicard for the Magicard 600 ID card printer. It is made for that printer only. The yellow, magenta and cyan panels combine to print photos and full colour designs. The black resin panel prints sharp text and barcodes. The clear overlay panel seals the finished card to help protect it against fading and everyday wear.The ribbon can be used for single or double sided printing and gives up to 200 prints per roll. Ribbons are region specific, so a printer bought outside the EU may not accept this one. Please check your printer model before you order.Key featuresYMCKO: yellow, magenta, cyan, black resin and overlay panelsUp to 200 prints per rollSuitable for single and double sided printingOverlay panel helps prevent fading and wearManufacturer part number MB200YMCKOCompatible printersMagicard 600..

Magicard MB600KO Black with Overlay Ribbon (600 Print)The Magicard MB600KO pairs a black resin panel with a clear overlay panel. It is made for the Magicard 600 ID card printer and gives 600 prints per roll.The black panel prints text and line art onto plastic cards, then the overlay seals each card with a clear layer to protect it from fading and everyday wear. This ribbon will not work in the Magicard Pronto, Enduro+, Enduro3E, Rio Pro, Rio Pro Xtended or Rio Pro 360, which use the MA600KO instead. Ribbons are made for specific regions, so this one may not work in a printer bought outside the EU. Store spare ribbons somewhere cool and dry, out of direct sunlight. Stored this way, they keep for about a year.Key featuresBlack resin and overlay (KO) ribbon600 prints per rollManufacturer part number MB600KO, model number 48-6023Overlay protects against fading and wearShelf life of around one year when stored correctlyCompatible printersMagicard 600..

Magicard MC600KO Black with Overlay Ribbon (600 Print)The Magicard MC600KO combines a black resin panel with a clear overlay. The black panel prints text and line art on plastic cards, then the overlay seals the card with a protective layer that helps prevent fading and everyday wear.This ribbon is made for the Magicard 300. It is not suitable for the Magicard 600, Pronto, Enduro+, Enduro3E or the Rio Pro range, so please check your printer model before ordering. Ribbons can be region specific, so if your printer was bought outside the EU contact us first. To get good results, store ribbons somewhere cool and dry out of direct sunlight and use them within about a year.Key featuresMagicard part MC600KO (model 48-3023)K = black resin, O = overlayUp to 600 prints per ribbonOverlay helps protect against fading and wearCompatible printersMagicard 300..

Zebra ZC300 800300-320EM Black with Overlay KDO Ribbon (700 Print)This Zebra KdO ribbon combines a black panel with a clear overlay film. It is made for the Zebra ZC300 and gives up to 700 prints per roll.The black panel prints sharp text and barcodes, then the overlay film is laid over the printed card to protect it against scratches and fading from UV light. That makes it a good fit for cards that are handled every day, such as staff ID or access cards where the barcode has to keep scanning. Please check the part number against your printer before ordering. If you would rather not print in-house, Castlemount can also produce the cards for you through its ID card printing service.Key featuresBlack panel with protective overlay filmUp to 700 prints per rollManufacturer code 800300-320EMOverlay helps protect against scratching and UV fadingSuited to printing barcodesCompatible printersZebra ZC300..

Zebra ZC300 800300-321EM Black Resin with Overlay KRO Ribbon (700 Print)The Zebra 800300-321EM KrO ribbon prints black resin text, barcodes and QR codes on the Zebra ZC300, then applies a clear overlay across the card. The overlay adds a protective layer that helps cards stand up to daily handling, which matters for passes that are swiped, carried and shown many times a day.The ribbon gives 700 single sided prints or 350 double sided. It is a sensible choice where cards carry text and codes rather than colour photos.Key featuresZebra part 800300-321EM (model 44-3650)K = black, r = resin, O = overlaySharp black text, barcodes and QR codesClear overlay panel for extra durability700 single sided or 350 double sided printsCompatible printersZebra ZC300..