Search

Evolis NCT223NAAA Easy4Pro Black Ribbon (2000 Print)The Evolis NCT223NAAA is a black monochrome ribbon from the Easy4Pro range. It prints names, ID numbers, barcodes and other fine detail in black and is a cost effective choice when your cards do not need colour.Easy4Pro ribbons do not need a cassette, which reduces plastic use. Each ribbon gives up to 2000 prints and suits the Evolis Primacy 2 and Zenius 2. Ribbons for the Primacy 2 do not fit the original Evolis Primacy, so please check your model. Ribbons can be region specific, so if your printer was bought outside the EU contact us before ordering.Key featuresGenuine Evolis High Trust® ribbon, part NCT223NAAABlack (K) monochrome panelCassette free Easy4Pro formatUp to 2000 prints per ribbonCompatible printersEvolis Primacy 2Evolis Zenius 2..

Evolis RCT023NAA Black Monochrome Ribbon (2000 Prints)The Evolis RCT023NAA is a black monochrome ribbon for printing ID cards in black only. Black is the usual choice for names, job titles, ID numbers and barcodes, where clear and sharp print matters more than colour.Each roll gives up to 2,000 card prints, so changeovers are kept to a minimum when you issue cards in larger numbers. Please check the part number against your printer before ordering.Key featuresBlack monochrome ribbonUp to 2,000 prints per rollManufacturer code RCT023NAASuited to text, numbers and barcodes..

Evolis RCT219NAAA BlackFLEX Ribbon (1000 Prints)The Evolis RCT219NAAA is a BlackFLEX monochrome ribbon for the Evolis Primacy 2 and Zenius 2 card printers. It prints bold black text and barcodes. The printed result is resistant to scratches and heat, which helps cards that are handled every day stay readable.Each roll gives up to 1,000 prints. Ribbons for the Primacy 2 do not fit the original Evolis Primacy. Ribbons are region specific, so a printer bought outside the EU may not accept this one. Please check your printer model before you order.Key featuresBlackFLEX monochrome ribbonBold black text and barcodesScratch and heat resistantUp to 1,000 prints per rollManufacturer part number RCT219NAAACompatible printersEvolis Primacy 2Evolis Zenius 2..

Evolis RCT223NAAA Black Monochrome Ribbon (2000 Prints)The Evolis RCT223NAAA black monochrome ribbon prints names, ID numbers, barcodes and other fine detail in black. It suits cards that do not need colour, for example on pre-printed card stock where only the cardholder details change.Each ribbon gives up to 2000 prints and suits the Evolis Primacy 2 and Zenius 2. Ribbons for the Primacy 2 do not fit the original Evolis Primacy, so please check your model. Ribbons can be region specific, so if your printer was bought outside the EU contact us before ordering.Key featuresGenuine Evolis High Trust® ribbon, part RCT223NAAABlack (K) monochrome panelSuits fine text and barcodesUp to 2000 prints per ribbonCompatible printersEvolis Primacy 2Evolis Zenius 2..

Magicard EN3 MA1000K-Black Resin Ribbon (1000 Prints)The MA1000K-Black is a single colour black resin ribbon for Magicard ID card printers. Each roll gives up to 1,000 card prints, which suits staff badges, visitor passes and membership cards printed in black only.Almost every card design needs some black, whether that is the cardholder's name, an outline or a barcode that has to scan. Black resin handles that fine detail cleanly. Please check the part number against your printer before ordering. Ribbons are made for specific regions, so this one may not work in a printer bought outside the EU. If you would rather not print in-house, Castlemount can also produce the cards for you through its ID card printing service.Key featuresBlack resin monochrome ribbonUp to 1,000 prints per rollManufacturer code MA1000K, model number 702-1004Suited to text, line art and barcodesCompatible printersMagicard ProntoMagicard E+..

Zebra ZC350 800350-301EM Black Ribbon (2000 Print)This Zebra black monochrome ribbon is for the Zebra ZC350 card printer. It prints in black only, which suits plain staff passes, visitor badges and membership cards carrying names, numbers or barcodes.Each roll gives up to 2,000 prints. The Zebra manufacturer code is 800350-301EM.Key featuresColour: blackMonochrome ribbonUp to 2,000 prints per rollZebra manufacturer code 800350-301EMModel 318-1221Compatible printersZebra ZC350..

Evolis Badgy CBGR0500K Black Monochrome Ribbon (500 Print)The Evolis Badgy CBGR0500K is a black monochrome ribbon for printing cards in black only. It suits staff badges, visitor passes and membership cards where the design is mainly names, ID numbers or barcodes and full colour is not needed.Each roll gives up to 500 card prints. Please check the part number against your printer before ordering. If you would rather not print in-house, Castlemount can also produce the cards for you through its ID card printing service.Key featuresBlack monochrome ribbonUp to 500 prints per rollManufacturer code CBGR0500KSuited to text, numbers and barcodes..

Magicard MB600KO Black with Overlay Ribbon (600 Print)The Magicard MB600KO pairs a black resin panel with a clear overlay panel. It is made for the Magicard 600 ID card printer and gives 600 prints per roll.The black panel prints text and line art onto plastic cards, then the overlay seals each card with a clear layer to protect it from fading and everyday wear. This ribbon will not work in the Magicard Pronto, Enduro+, Enduro3E, Rio Pro, Rio Pro Xtended or Rio Pro 360, which use the MA600KO instead. Ribbons are made for specific regions, so this one may not work in a printer bought outside the EU. Store spare ribbons somewhere cool and dry, out of direct sunlight. Stored this way, they keep for about a year.Key featuresBlack resin and overlay (KO) ribbon600 prints per rollManufacturer part number MB600KO, model number 48-6023Overlay protects against fading and wearShelf life of around one year when stored correctlyCompatible printersMagicard 600..

Magicard MC600KO Black with Overlay Ribbon (600 Print)The Magicard MC600KO combines a black resin panel with a clear overlay. The black panel prints text and line art on plastic cards, then the overlay seals the card with a protective layer that helps prevent fading and everyday wear.This ribbon is made for the Magicard 300. It is not suitable for the Magicard 600, Pronto, Enduro+, Enduro3E or the Rio Pro range, so please check your printer model before ordering. Ribbons can be region specific, so if your printer was bought outside the EU contact us first. To get good results, store ribbons somewhere cool and dry out of direct sunlight and use them within about a year.Key featuresMagicard part MC600KO (model 48-3023)K = black resin, O = overlayUp to 600 prints per ribbonOverlay helps protect against fading and wearCompatible printersMagicard 300..

Zebra 800300-301EM Black Ribbon (2000 Print)This Zebra black ribbon is made for the Zebra ZC100 and ZC300 card printers. It prints in black only. Each roll gives up to 2,000 card prints.A black monochrome ribbon is the usual choice when your cards carry names, job titles, ID numbers or barcodes and do not need full colour. The high print count per roll keeps changeovers to a minimum on busy issuing desks. Please check the part number against your printer before ordering. If you would rather not print in-house, Castlemount can also produce the cards for you through its ID card printing service.Key featuresBlack monochrome ribbonUp to 2,000 prints per rollManufacturer code 800300-301EMMade for the Zebra ZC seriesCompatible printersZebra ZC100Zebra ZC300..